Moldex 4650 Airwave (Medium/Large) NIOSH N95 Healthcare Respirator Mask - Made in USA
Free Shipping over $99 to most locations.
Pickup available at Canada Strong
Ready in 30 mins. Pickup hours: Mon-Thurs 8:00am-3:00pm, Fri 8:00-2:00. Excludes observed Ontario stat holidays.
Moldex 4650 Airwave (Medium/Large) NIOSH N95 Healthcare Respirator Mask - Made in USA
Box of 10
Canada Strong
660 Riddell Rd #5
Orangeville ON L9W 5G5
Canada
Made in USA - NIOSH N95 - Surgical Respirator approved for Healthcare
This is a Nose Flange version. For Full Flange, see 4150 (M/L), or 4151 (S).
The Moldex 4650 is a MEDIUM-LARGE disposable Surgical Particulate Respirator and Surgical Mask with NIOSH N95 approval, intended for healthcare. Key features include
- Wave Design reduces breathing resistance
- FlexFit moves with your face and stays in-place for all-day comfort
- Nose flange to improve the face seal at the nose
- Lightweight cup design that resists collapse
The AirWave Healthcare series provides protection for patients and healthcare personnel - including, but not limited to, doctors, nurses, dental professionals, and first responders — against the transfer of microorganisms, body fluids, and particulates.
The AirWave series is dependable, comfortable, and ultra-breathable to wear all-day throughout the shift.
Lower your costs and use fewer respirators. The Dura-Mesh shell protects the filter media, so it stays cleaner for longer. The shell also resists collapsing in hot, humid environments, so the respirator holds its shape longer. The result is fewer respirators used, and lower costs.
Key features:
- NIOSH Approved Surgical N95
- MRI SAFE - no metal in the mask whatsoever - will not distort head/neck MRI
- AIRWAVE - increased surface area means lower breathing resistance
- 2 SIZES AVAILABLE for the entire workforce
- 4650 Medium-Large
- 4651 Small
- COLLAPSE-RESISTANT cup shape design
- SOFT FOAM NOSE FLANGE and softspun lining for increased comfort
- DURA-MESH exterior keeps hands from touching filter media, helping the respirator to last the entire shift
- BRAIDED STRAPS won't pull hair
- MEETS ASTM LEVEL 3 REQUIREMENTS to use in place of a surgical/procedural mask
- MEETS CDC GUIDELINES For TB Exposure Control within healthcare facilities, and protection against laser plumes of surgical smoke.
- Class 2 Medical Device, cleared by the FDA. NIOSH Certified under 42CFR84. Bacterial Filtration Efficiency (BFE)>99.99%
- NON LATEX construction
- LOWER YOUR COSTS AND USE FEWER RESPIRATORS The exclusive DURA-MESH SHELL protects the filter media, so it stays cleaner-looking longer. The shell also resists collapsing in hot, humid environments, so the respirator holds its shape longer and the result is fewer respirators used and lower costs.
- EASY COMFORTABLE SEAL The Soft Foam Flange helps to maintain the seal without pressure points, and the pinch free, contoured molded shape means there's no need for a metal nose band to adjust.
- MADE IN AMERICA Quality you can trust.
- SUSTAINABLE SOLUTIONS 100% PVC-Free, like all Moldex products and packaging.
- OTHER STANDARDS: Biocompatibility Cytotoxicity, Sensitivity and Irritation per ISO 10993-1,-5 and -10, Meets heat and flame resistance in accordance with ANSI/ISEA 110-2009 SECTION 7.11.1, Bacterial Filtration Efficiency - 99.9%, Resistance to Synthetic Blood per ASTM F 1862; 160mmHg (highest level)
- Shelf Life: 9 years from date of manufacture
- UPC 092311465005
Packaging
- 10 masks per box (masks not individually wrapped)
- Full case: 100 masks (10 boxes of 10)
Usage
- Make sure the particulate respirators are clean before use
- Never try to clean or sanitize a particulate respirator
- Inspect particulate respirators for scratches or other damage prior to use. Any articulate respirator which shows signs of damage must be discarded.
- Follow Moldex donning instructions
- Dispose after 8 hours of accumulated use (e.g. one 8-hour work shift, or eight 1-hour trips to the store). If the mask is contaminated or damaged replace it with a new one.
- DO NOT use for gases and vapors, oil, aerosols, asbestos, arsenic, cadmium, lead,
4,4-methylene dianiline (MDA), or abrasive blasting (unless physically separated from the blasting) - DO NOT use for particulate concentrations exceeding 10X PEL/OEL
Storage
- Shelf Life: 9 years from the manufacturing date
- Subject to the Storage Conditions specified below, the mask may be used until the expiry date printed on the packaging
- Product should be stored in clean, dry conditions within the temperature range: -20°C to +30°C with a relative humidity of <80%
- Always store the particulate respirators in their original packaging in a cool, dry room in such a way that they cannot be damaged.
- Avoid exposure to direct sunlight
- Do not store the particulate respirators after the indicated expiry date
Useful Links
WARNING: These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In Canadian workplaces, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, or ask supervisor.
Due to safety requirements, we are unable to accept returns on masks or respirators even if unopened. All sales are final.
,%20or%204151%20(S).%0AThe%20Moldex%204650%20is%20a%20MEDIUM-LARGE%20disposable%20Sur...
){kind=link}
Returns: Due to safety requirements, we are unable to accept returns or exchanges on any health-related items.